Formlabs
Form Cure
Width
10.3
Depth
10.3
Height
13.4
inches
Weight
12.4 lb
Runs on
110 V
Full load
6 A
Rated power
0.144 kW
Horsepower
Not specified
PPE for this machine
Required
Safety Glasses Z87.1
Required
Nitrile
How to work safely
Treat uncured resin as a skin sensitiser: nitrile gloves at all times when handling the vat, the build plate, wet parts, or the wash station. Repeated skin contact can cause an allergy that develops suddenly and permanently. Never wash resin off skin with isopropyl alcohol. Keep the lid closed while printing, work with ventilation running, and keep IPA away from ignition sources. Cure parts fully before handling them without gloves. Dispose of resin, IPA and contaminated paper towels as chemical waste, never down a drain.
All requirements for this machine type →Where it lives
No location recorded for this unit. Ask staff where it currently lives before assuming.