Formlabs
Form Wash
Width
14.1
Depth
10.3
Height
11.5
inches
Weight
14.5 lb
Runs on
110 V
Full load
2 A
Rated power
0.05 kW
Horsepower
Not specified
PPE for this machine
Required
Safety Glasses Z87.1
Required
Nitrile
How to work safely
Treat uncured resin as a skin sensitiser: nitrile gloves at all times when handling the vat, the build plate, wet parts, or the wash station. Repeated skin contact can cause an allergy that develops suddenly and permanently. Never wash resin off skin with isopropyl alcohol. Keep the lid closed while printing, work with ventilation running, and keep IPA away from ignition sources. Cure parts fully before handling them without gloves. Dispose of resin, IPA and contaminated paper towels as chemical waste, never down a drain.
All requirements for this machine type →Where it lives
No location recorded for this unit. Ask staff where it currently lives before assuming.